How to Change the Size of a Slide on Keynote

Open a new or existing Keynote presentation.
Click on the blue 'Inspector' button in the toolbar. Click the 'Document' pane then click the 'Document' button.
Click the 'Slide size' pull-down menu at the bottom of the window. Select the desired slide size from the pre-sets or click 'Custom Slide Size' to enter the desired width and height in pixels. Click 'OK' to confirm the size.
VPS Hosting

How to Use an iPhone's Internet on a MacBook

Press the 'Home' button on your iPhone and slide your finger across the screen to unlock it.
Press the 'Settings' button on your screen, and click the 'General' tab. Tap 'Network' and 'Internet Tethering.'
Slide the switch so that it reads 'On,' and press the 'Home' button on your device to return to the main screen.
Plug your iPhone into your computer using your device's USB cable.
Click the 'Network Preferences' button in the pop-up window once the phone is connected, and click 'iPhone' from the network list. Click 'Apply' to connect computer to your iPhone.
Open your Internet browser to begin using the iPhone's Internet connection.
VPS Hosting

How to Use Micro SD Cards With Apple Laptops (6 Steps)

Remove the microSD card from the slot in your cell phone.
Insert the microSD card into the SD card adapter. It should slide right into the small slot in the card.
Insert the SD card adapter into the media port on the laptop. The port should either show a SD card icon or say SD/MMC next to it.
Open 'Finder' and open the SD card drive.
Drag and drop the files from the SD card to another folder on your laptop.
Drag and drop files saved on your computer to the SD card folder. When you put the microSD card back in to your phone, those files will appear.
VPS Hosting

How to Change the Sleep Mode in Mac

Go to the 'Applications' folder and double-click 'System Preferences.' Select the 'Energy Saver' icon.
Adjust the 'Computer sleep' and 'Display sleep' slide bars to change the time when the computer will go into sleep mode. If you are on a portable, use the tabs at the top of the screen to adjust the sleep mode times for when the computer is running from the battery or the power adapter.
Click the 'Schedule' button and enter a specific time for the computer to wake up or sleep, if desired.
VPS Hosting

How to Connect an iPad to WEP Wi

Open your 'Settings' by tapping the icon on your home screen.
Select the 'Wi-Fi' tab from the 'Settings' menu. The 'Wi-Fi Networks' page loads.
Slide the 'Wi-Fi' switch at the top of the page to the 'On' position.
Choose the 'Other' button.
Enter the name of the WEP network in the 'Name' field of the new page that loads.
Tap the 'Security' button, then select 'WEP' from the security options list. Press the 'Other Network' button to return to the 'Wi-Fi Networks' page.
Tap the 'Password' field, then enter the correct password for the WEP network.
Press the 'Join' button to log onto the WEP network.
VPS Hosting

How to Display Notes While Presenting (8 Steps)

Start your computer and open the PowerPoint application. Click the 'File' tab at the top of the PowerPoint window and select 'Open.' Select the presentation slideshow that you have prepared. Plug in your computer to the separate monitor or projector that you will use during your presentation.
Click the 'Slide Show' tab in the PowerPoint Ribbon, and select 'Use Presenter View' in the Monitors group. Wait for the 'Display Settings' dialog box to appear, click on the 'Monitors' tab and choose the monitor icon that you want to use during your presentation to view your speaker notes. Select the check box which is labeled 'This is my main monitor.'
Click the monitor icon for the secondary monitor, which will be viewed by your audience. Select the check box which says 'Extend my Windows Desktop onto this monitor' and click the 'OK' button on the dialog box.
View the different monitors to make sure that the presentation notes are visible on your screen but not on the projected screen or monitor that your audience will see. Look in the 'Slide Show' tab of the Ribbon, in the Monitors group; the monitor icon that represents your audience's view of the presentation should appear in the 'Show On' list.
VPS Hosting

How to Remove the Keyboard in a MacBook (8 Steps)

Put the soft cloth down on a table. Close the lid of the MacBook and place it face down on the soft cloth. Turn the lock on the bottom panel to release the battery. Slide the battery out of the bottom and put it aside.
Use the Phillips jeweler's screwdriver to remove the three screws running across the long part of the 'L' shaped bracket inside of the battery compartment. Lift the 'L' shaped bracket up and out of the battery compartment.
Use the Phillips jeweler's screwdriver to remove the two screws, one on each side, at the end where the battery cable is located inside the battery compartment.
Lift up on the three metal levers in the battery compartment and remove the screws beneath each using the Phillips jeweler's screwdriver. Use the Phillips jeweler's screwdriver to remove the 2nd, 4th, 7th and 9th screws in the front of the battery compartment, counting from the left side.
Use the Phillips jeweler's screwdriver to remove the three screws from the bottom of the case; two at the back edge and one in the middle. Use the Phillips jeweler's screwdriver to remove the two screws on the outside of the case next to the battery compartment.
Use the Phillips jeweler's screwdriver to remove the two screws on the side of the case next to the optical drive. Remove the four screws from the back of the MacBook where the hinge is with the Phillips jeweler's screwdriver.
Turn the MacBook right side up and put it down on the soft cloth. Open the lid. Grab the back corners of the top plate of the MacBook from both sides. Wiggle the top plate loose.
Grab the top plate from both edges at the front. Slowly lift it up until you see the track pad cable's connector on the case. Pull the connector off the case. Remove the top plate and the keyboard from the case of the MacBook.
VPS Hosting

How to Scan on the iPad (4 Steps)

Power on the iPad. Slide your finger across the unlock screen feature, located on the bottom of the screen. This brings up all of the icons and other information available on the device.
Place your finger on the lower-left side of the display screen, then slide it across to the right end of the screen. This brings up a scan bar at the top of the screen.
Press your finger on the scan bar to activate the keypad. Type in the desired file or application name, and all the files that match the typed in name appear on the screen.
Push down on the matching information to load the content onto the screen.
VPS Hosting

How to Repair a Dead Laptop Battery

Shut down the power on your laptop and close the screen.
Locate the battery case on the underside of your laptop. The case will be a narrow rectangle shape, and be about as long as the width of the laptop.
Notice a lock/unlock sliding switch underneath your laptop. Usually there are two of these switches, each with a battery symbol, near each end of the battery case.
Grasp the laptop battery with your fingertips as you slide one of the switches to the unlock position. Now unlock the second sliding switch. The battery case should now come loose, which will allow you to remove it from the laptop.
Put the battery case in a large freezer bag. Make sure the bag is sealed completely and place it in your freezer for 12 hours.
Remove the bag from the freezer after 12 hours have passed. Take your laptop battery out of the freezer bag and allow it to completely return to room temperature. If condensation appears on the battery case, wipe it away with a small towel.
Slide the battery case back into the empty compartment on the bottom of your laptop. Make sure to lock the battery in place by moving both lock/unlock switches to the locked position.
Plug your laptop into a wall outlet, but do not turn it on. Allow the battery to charge for several hours.
Turn your laptop on and check the battery monitoring icon to see if the unit is fully charged. Usually the icon is on the bottom right side of the computer screen. Wait until the icon shows a full charge before proceeding.
Remove the wall outlet power and continue using your laptop, or let it sit with the power on, until the battery runs completely down. Now plug power back into the laptop and fully recharge your battery. Repeat this cycle of charging and discharging four times. After the fourth cycle you should notice your battery holding a charge for a much longer time than before.
VPS Hosting

How to Charge My Mac Laptop Overseas (3 Steps)

Slide the male plug end of your Mac laptop AC power cord into the foreign adapter plug. The male end of a plug is the one with the prongs. Because the entire line of portable Macintosh devices includes an AC adapter that is dual-voltage ready, you will not need to use a converter.
Plug the power adapter into the Mac laptop.
Plug the male end of the foreign adapter plug into the wall outlet. The computer will now register that the battery is charging.
VPS Hosting

How to Add Yahoo Mail to your iPad

Browse to Yahoo! Mail (see 'Resources') and create an email account if you do not currently own one.
Press the black power button on the top-right side of your iPad. Slide the arrow to the right to unlock the device.
Tap the 'Settings' app on your iPad screen.
Tap 'Mail,' 'Contacts' and then 'Calendars.' Tap 'Add Account...' and tap 'Yahoo! Mail.'
Type your full name, full Yahoo! Mail address (example@yahoo.com) and password. Tap 'Save.'
Click the 'Home' button on your iPad and tap the 'Mail' app. Tap the Yahoo! account to view and write emails.
VPS Hosting

How to Operate the Apple iPad (9 Steps)

Press the 'Wake/Sleep' button to wake the iPad. If your iPad is off, press and hold the button until you see the Apple icon. Your iPad will start up in a few seconds.
Press the 'Wake/Sleep' button to put your iPad to sleep. To turn it off, hold the button down until the 'Slide to power off' slider appears on the screen. Slide it to shut off the iPad.
Press the 'Home' button on the front of the iPad to back out of the app you are running and return to your menu. Slide the 'Slide to unlock' slider to get started. If you are on the menu, pressing this button brings up the Search page, where you can search for apps or data by typing it.
Press the 'Up/Down' volume button on the side of the unit to raise or lower the volume.
Turn the 'Screen Rotation Lock' switch above the volume buttons to keep the screen from rotating as you move the iPad around.
Turn the unit from a horizontal to a vertical alignment or vice versa to automatically rotate the screen.
VPS Hosting