How to connect two Macs using FireWire target disk mode

Assume Mac #1 is your main machine that the external drive will be connected to. Mac #2 is the Mac you want to use as an external hard drive.Mac #1 should be turned on and Mac #2 should be powered down.
Connect the FireWire cable to a port on each Mac so the Macs are connected together by the cable.
Turn on Mac #2 while holding down the 't' key. You can stop when you see the FireWire drive appear on the desktop of Mac #1. You can now access any of the data on Mac #2.
Drag the Mac #2 volume(s) to the trash when you're done. Then you can turn off Mac #2 and unplug the cable.
VPS Hosting

How to Use a USB Hub on a MacBook (3 Steps)

Plug the power adapter of the USB hub into the wall outlet, if you are using a self-powered USB hub. Self-powered USB hubs provide more power to any connected devices than bus-powered USB hubs.
Insert the USB connector of the hub into the USB port closest to you when you face your MacBook.
Plug your USB devices into the ports on the hub. Some devices run solely on the power from the USB connection, while others include a plug for a wall outlet. Your devices will be active as soon as they are connected and have power.
VPS Hosting

How to Connect a MacBook to a Dell External Monitor

Check to see if your Dell monitor has a VGA or DVI connection. VGA is an older technology, but many monitors have adapters for both connection and include two cables: one VGA and one DVI. Likewise, check your MacBook to see if it has a DVI or Mini DisplayPort jack. Locate the appropriate adapter if required.
Confirm that both the MacBook and the external Dell monitor are powered down. Attach the video cable to the Dell monitor. The other end must be attached to the MacBook, either directly or using the adapter.
Confirm that the adapter and cable are seated properly. Make sure that the connection area is out of the way of anything that might knock it out of place or possibly damage the adapter and/or computer by bending the pins.
Turn on the Dell monitor first and the MacBook second. When the computer is finished booting up, you will see the desktop on both displays.
Launch the System Preferences (found inside the Applications folder) and click on 'Displays.' A 'Display' pane will appear on both the MacBook screen and on the Dell monitor screen. Note that you can configure the resolution of each of these displays separately.
Select a suitable resolution for each of the displays. Then click on the 'Arrangement' tab on the pane on the Mac screen. This is when you decide how you want to configure the arrangement of your displays. You can drag the Dell display to either side of the Mac display to extend the desktop, or you can select “Mirror Displays,” which is usually enabled when you plan on using the external monitor as the main display.
Drag the menu bar from the Mac display to the Dell display in the 'Arrangement' pane if you want to use the Dell as your primary display and have the Mac menus on the external monitor. You can also configure the color on both displays by clicking on the “Color” tab.
VPS Hosting