How Do I Hook My Mac to My Mixer Board?

Connect the mixer board to other instruments, microphones or sources you want to use in the recoding. Connect the power source to the mixer. Connect the amplifier and speakers to the mixer board as well.
Connect the small end of the 3.5mm-to-RCA cable to the line-out jack on the back of the Mac computer or on the side if a MacBook. On many Macs, the line-out port has a green ring around it and might be the connection used for your computer speakers if you are using a desktop computer. Other Macs have a headphone or audio-wave symbol next to the port to differentiate it from line-in or microphone ports. Disconnect the speakers from your computer if the port is already in use.
Connect the other end of the audio cable to the RCA line-in or auxiliary jacks on the mixer. If the mixer does not have RCA ports, use an RCA-to-1/4-inch adapter to connect the Mac to the mixer board.
Open an audio or music player application on the Mac. Load an audio file into the player, then click 'Play.' You should be able to hear the sound on the external speakers connected to the amplifier plugged into the mixer board.
VPS Hosting